Warping machine
Warping machine can be divided into two categories, one is the traditional drum type friction drive warping machine, the other is the new warping shaft direct drive warping machine.
Customer DemandAdvantage
The warp yarn drawn from the bobbin on the bobbin frame first passes through the gap between the clamp and the column through the break detector, forward through the yarn guide porcelain plate, then through the yarn guide rod, through the expansion reed, around the length measuring roll and then wound to the warp shaft. The warp shaft can be dragged directly from the variable speed motor. When the winding diameter increases, the speed change signal is sent out by the tachometer generator connected with the measuring roll, and the speed of the motor is automatically reduced by the electrical control device to keep the winding speed of the warp shaft constant.
After the yarn is drawn from the bobbin on the bobbin, the guide bar, the back reed, the guide bar, the photoelectric break stop, the split reed, the fixed reed, the length measuring roller and the guide roller are wound to the drum one by one, and all the warp on the drum is withdrawn counterclockwise with the rotation of the knitting shaft according to the double dot line, and then rolled to the knitting shaft.
Search